PCB Design with ESP32 and MPU6050
Posted : 3 weeks ago Posted By: Shahzaib Ali
Member Since: 18/11/2023
Project DescriptionDesign a circuit with esp32 C3 MINI-1 Family: WROOM-02-N4 interfaced with MPU6050 via i2c.
The circuit should be powered by a battery of 3.7v.
All this should be done on a single board.
There should be pins for debugging.
The board should be programmed externally using FTDI via a USB C or USB B port.
I will pay an extra $10 for testing and debugging.
Embedded System Design